SOYO SY-6IWM - Manual (Page 42)

Hardware Installation SY-6IWM
38
7. Cooling Fan Installation
(1) CPU Cooling Fan
After you have seated the CPU properly on the processor, attach the 3-pin fan
cable to the CPUFAN connector on the Motherboard. The fan will stop when the
system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS
Setup Utility, [Soyo Combo] menu.)
To avoid damage to the system, install according to the following pin assignment:
CPU Cooling Fan
CPUFAN Pin Assignment
SENSOR 12V GND
1 3 2