SOYO SY-6IWM - Manual (Page 51)

Hardware Installation SY-6IWM
47
2-3.7 Quick BIOS Setup
This Motherboard does not use any hardware jumpers to set the CPU frequency.
Instead, CPU settings are software configurable with the BIOS [Soyo Combo
Feature]. The [Soyo Combo Feature] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then press
the <DEL> key during the system diagnostic checks to enter the Award BIOS
Setup program. The CMOS SETUP UTILITY will display on screen. Follow these
steps to configure the CPU settings.
SETUP UTILITY will display on screen. Then, follow these steps to
configure the CPU settings.
Step 1.
Select [STANDARD CMOS SETUP]
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to “Auto”.
Step 2.
Select [Load Optimized Defaults]
Select the “Load Optimized Defaults” menu and type “Y” at the prompt to load the
BIOS optimal setup.