Sherwood RD-8504 User Manual
Page 12
12
• ROOM 2 playback feature allows you to play a different program source in another room as well as one source in the main
room at the same time.
• For ROOM 2 playback, connect the ROOM 2 OUT jacks to the amplifier, TV, etc. installed in another room, or
connect the ROOM 2 speaker terminals to the speakers.
• Because this receiver cannot drive the surround back speakers and the ROOM 2 speakers simultaneously, you should
assign their power amplifier correctly depending on how to use them. (For details, refer to "When selecting the AMP Assign"
on page 45.)
■Notes :
• To minimize hum or noise, use high quality connection cords.
• You cannot use the digital audio signal for ROOM 2 playback.
10.
CONNECTING ROOM 2 OUTS
11.
AC INPUT
• Plug this cord into a wall AC outlet.
E
N
G
L
IS
H
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 12