Sherwood RD-8504 User Manual

Page 18

Advertising
background image

E

N

G

L

IS

H

18

5.

Repeat the above steps 1 to 4 for each of your

components.

UsInG FUnctIons oF ReMote contRoL

Entering a setup code

• This remote control can control up to 8 different components.
• Before operating audio and video components other than this receiver with using this remote control, the setup code for each

component should be entered.

• For system remote control operation, “000” was stored previously in the memory of the device button “DOCK” for Sherwood iPod

dock, “CD” for Sherwood CD player, “BD” for Sherwood BD/DVD player and “TV” for Sherwood TV respectively as its factory
setup code. So, you don’t need to enter its code for each Sherwood component except in such a case that its code does not work.

• The LED will flicker once.

Note :

• The “AVR” button is unavailable for the audio

components other than this receiver.

1.

Turn on the component you want to operate.

2.

Find the setup codes according to the type and

the brand name of your component, referring to
“Setup Code Table” on page 65.

3.

Press and hold down both the ENTER button

and the desired one of the DEVICE buttons for
more than 1 seconds.

4.

Enter a 3 digit code, aiming the remote control at

the remote sensor on the component.

Example: When entering “001”.

• If entering is performed successfully, the LED will flicker

twice.

• To be sure that the setup code is correct, press the

POWER ON (or STANDBY) button. If your component
is turned off, the setup code is correct.

• When your component is not turned off, repeat the

above steps 2 to 4, trying each code for your
component until you find one that works.

Notes:
• If the LED did not flicker twice, then repeat the above

steps 3 to 4 and try entering the same code again.

• Manufacturers may use different setup codes for the

same product category. For that reason, it is important
that you check to see if the code you have entered
operates as many controls as possible. If only a few
functions operate, check to see if another code will work
with more buttons.

RD-8504(A)_ENG_091118:RD-8504(A)2009-11-18오 6:41페이지18

Advertising