Sherwood RD-8504 - Manual (Page 30)

30
• The station has now been stored in the memory.
• A stored frequency is erased from the memory by
storing another frequency in its place.
• If "MEM" goes off, start again from the above step 2.
■
MEMORY BACkUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
Tuning to preset stations Manual presetting
• You can store up to 30 preferred stations in the memory. • After selecting the tuner as an input source, select the
desired preset number.
1.
Tune in the desired station with auto or manual
tuning.
3.
Select the desired preset number (1~30) and
press the (MEMORY/)ENTER button.
4.
Repeat the above steps 1 to 3 to memorize
other stations.
2.
Press the (MEMORY/)ENTER button.
• "MEM" is flickering for several seconds.
E
N
G
L
IS
H
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 30