Sherwood RD-8504 - Manual (Page 32)

E
N
G
L
IS
H
32
3.
While displaying the selected category, select
the desired channel.
Examples:
For "3" :
For "27" :
For "124" :
• When "SR - - -" disappears, repeat again from the
above step 1.
1.
In the SIRIUS mode, press the SEARCH MODE
button to select the direct search mode, then
press the ENTER button.
2.
While displaying "SR - - -", select the desired
channel number with pressing the NUMERIC
(0~9) buttons.
• Each time the SEARCH MODE button is pressed, the
search mode changes as follows:
→ DIR SRCH → CAT SRCH → OFF
(Direct search) (Category search)
• Then "SR - - -" is displayed.
• You can select a SIRIUS Satellite Radio channel directly
by entering its number.
Direct search
1.
In the SIRIUS mode, press the SEARCH MODE
button to select the category search mode, then
press the ENTER button.
2.
While displaying a category name, select the
desired category, then press the ENTER button.
• Then a category is displayed.
• Each time the SELECT </> buttons are pressed, one of
different categories is selected.
• When a category name disappears, repeat again from
the above step 1.
• Category search allows you to select the desired
channel by the selected category.
Category search
1.
Select the desired channel with preforming
channel search, direct search or category search.
2.
To memorize the channels, perform the steps 2 to
4 in "Manual presetting" procedure on page 30.
• You can store up to 30 preferred channels in the memory.
Presetting channels
• In the SIRIUS mode, select the desired preset channel.
Preset search
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 32