Sherwood RD-8504 - Manual (Page 55)

E
N
G
L
IS
H
55
• This menu allows you to make the various settings
depending on how to use the input sources connected to
this receiver.
SETTING THE INPUT SETUP
When selecting the items other than Re-Name
Example: When selecting the VIDEO 1
■Note :
• Depending on the input source, some items cannot be selected.
1.
Press the CURSOR UP/DOWN buttons to select the desired input source, then press the CURSOR RIGHT
button to enter the setting menu.
2.
Press the CURSOR UP/DOWN buttons to select the desired item, then press the CURSOR RIGHT button to
enter its setting menu.
3.
Press the CURSOR UP/DOWN buttons to set the selected item as desired, then press the ENTER button.
• When the CURSOR LEFT button is pressed on the setting menu, the previous menu will be returned to.
• When adjusting the AV Sync, use the CURSOR UP/DOWN buttons only.
VIDEO 1
V2/iPod
VIDEO 3
BT
CD
TAPE
F. AUX
TUNER
EXT. IN BACK NEXT
Re-Name
HDMI Assign
Component Assign
Audio Assign
Video Mode
Audio Mode
Video Scaling
AV Sync
HD Audio BACK NEXT
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 55