Sherwood RD-8504 - Manual (Page 39)

39
E
N
G
L
IS
H
• ROOM 2 ~ is displayed for several seconds.
• Each time the button is pressed, the ROOM 2 mode
changes as follows :
ON : To turn on the ROOM 2 function.
↕ ("R2" lights up.)
OFF : To turn it off. ("R2" goes off)
■Note :
• When ROOM 2 mode is set to OFF, the ROOM 2
volume cannot be selected.
• Each time the “INPUT” button is pressed, the ROOM 2
input can be selected among MAIN source, TUNER, CD,
F.AUX, TAPE, BT (Bluetooth IN), VIDEO 1 ~ VIDEO 3 as
a ROOM 2 source.
1.
Turn on the ROOM 2 function.
2.
Select the desired input as a ROOM 2 source.
3.
Adjust the ROOM 2 volume.
4.
Start play on the component related to the ROOM 2 source.
When using the buttons on the remote control unit
• You can adjust the volume on the power amplifier
assigned to “Surr Back
↔Room 2” or “Room 2”. (For
details, refer to “When selecting the AMP Assign” on
page 45.)
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 39