Sherwood RD-8504 User Manual
Page 43
43
E
N
G
L
IS
H
INPUT*
3
(Input Setup)
MLT ROOM
(Multi Room Setup)
R2 SET (Room2 Set)
R2 INPUT (Room2 Input)
R2 VOL (Room2 Volume)
PARAMTR
(Sound Parameter)
PANORAMA
C-WIDTH (Center Width)
DIMEN (Dimension)
DRC DD (Dynamic Range Compression Dolby)
DRC THD (Dynamic Range Compression Dolby TrueHD)
ADV. VID
(Advanced Video)
PREP (Progressive Reprocessing)
DET ENHA (Detail Enhancement)
EDGE (Edge Enhancement)
MOSQ NR (Mosquito NR)
TEST PAT (Test Patterns)
TRANSPAR (OSD Transparency)
PREP : OFF / AUTO
D. ENH : 0 / -10 ~ +10
OSD : LOW / MID / HIGH
EDGE : 0 / -10 ~ +10
NR : OFF / LOW / HIGH
OFF / FRM GMTY (Frame Geometry) / BRTCNTRS (Bright /
Contrast) / CHKBOARD (Checker Board) / VRTILINE (Vertical Lines) /
HORILINE (Horizontal Lines) / JUDDER / BARS75 (Color8 Bars 75) /
BARS100 (Color8 Bars 100)
PANO : OFF / ON
DRC : OFF / LOW / MID / HIGH
DRC : AUTO / OFF / LOW / MID / HIGH
C.WIDTH : 3 / 0 ~ 7
DIMEN : 0 / -3 ~ +3
ROOM2 : OFF / ON
IN : MAIN / VID 1 ~ 3 (Video1 ~ 3) / BT / CD / TAPE / F.AUX / TUNER
VOL : 30 dB / MIN (0) ~ MAX (80)
VID1 CFG
(VIDEO1 Configuration)
V2IPDCFG
(VIDEO2/iPod Configuration)
VID3 CFG
(VIDEO3 Configuration)
BT CFG (BT Configuration)
CD CFG (CD Configuration)
TAPE CFG (TAPE Configuration)
F.AUX CFG
(F.AUX Configuration)
TUNER CFG
(TUNER Configuration)
EXTIN CFG
(EXTERNAL IN Configuration)
RE-NAME*
1
HDMIASSG (HDMI Assign)
CPN ASSG (Component Assign)
AUD ASSG (Audio Assign)
VID MODE (Video Mode)
AUD MODE (Audio Mode)
VID SCAL (Video Scaling)
AV SYNC
HD AUDIO
HDMI : HD1 ~ 3 (HDMI 1 ~ 3) / - - -
CPN : CPN1 ~ 2 (Component 1 ~ 2) / - - -
AUD : OPT1 ~ 2 (Optical 1 ~ 2) /
COX1 ~ 2 (Coaxial 1 ~ 2) / - - -
V.MODE : AT (Auto) / HD (HDMI) /
CPN (Component) / SVD (S-Video)
CPS (Composite)
A.MODE : AT (Auto) / HD (HDMI) /
DG (Digital) / AN (Analog)
AUTO / BYPASS (HDMI Bypass) / 480P /
720P / 1080I / 1080P
SYNC : 0 ms / 0 ~ 200
HD A : ON / OFF
Continued
*
1
: For the setting details, refer to the corressponding operating instructions on the OSD Menu Settings.
*
2
: These are the setting values when the UNIT is set to M (Meter).
*
3
: Depending on the input source, some items cannot be selected.
RD-8504(A)_ENG_091118:RD-8504(A) 2009-11-18 오 6:41 페이지 43