Sanyo PLC-WL2503 - Manual (Page 39)

39
Video System Selection
1 AV System Menu (Video or S-video)
AV System Menu (Component)
2
If the projector can not reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4 .43, PAL-M, and PAL-N.
PAL/SECAM/NTSC/NTSC4 .43/PAL-M/PAL-N
The projector automatically detects an incoming video
signal, and adjusts itself to optimize its performance.
If the projector can not reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 720p, 1035i, and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.
Auto
 Note:
The AV System Menu can not be selected when selecting
RGB (Scart) or HDMI.
Press the MENU button to display the On-Screen
Menu. Use the Point ▲▼ buttons to select Input and
then press the Point ► or the SELECT button.
Use the Point ▲▼ buttons to select Video or S-video
or Computer 1(Component) and then press the
SELECT button.
3 Use the Point ▲▼ buttons to select System and then
press the Point ► or the SELECT button. Use the
Point ▲▼ buttons to select the desired system and
then press the SELECT button.
Video Input
Component
Video or S-video