Sanyo PLC-WL2503 - Manual (Page 8)

8
Part Names and Functions
① Lamp Cover
②
Top controls
③ Adjustable feet
④ Infrared Remote Receiver
⑤ Projection Lens
⑥ Speaker
⑦ Lens Cover
⑧ Interactive Camera
⑨ Exhaust vent
⑩ LAN Connection Terminal
⑪ Indicators
⑫ Focus Ring
⑬ Power Cord Connector
⑭ Filter
⑮ Security Bar
⑯ Terminals and Connectors
 Note:
⑩ LAN Connection Terminal is for the Network
function. Refer to the owner’s manual of “Network
Set-up and Operation” .
 Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.
Front
⑤
Side
⑭
⑩

⑫ ⑪ ⑬
①
④
⑯
⑮
②
⑦
③
③
⑥
CAUTION
Do not turn on a projector with lens cover attached. High
temperature from light beam may damage lens cover
and result in fire hazard.
⑨
CAUTION
Hot air is exhausted from the exhaust vent. Do not put
heat-sensitive objects near this side.
⑧
Interactive Function
 Note:
As for Interactive function, refer to the owner's
manual of "Interactive Function" in the application
CD-ROM.