Sanyo PLC-WL2503 - Manual (Page 76)

76
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service center.
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No .
*Should the four-digit number be changed,
the factory set number will be invalid.
Appendix
Attatching the Cable Holder
Be sure to stick the adhesive cable holder (supplied) on
the bottom of the projector and store the USB cable in the
holder to prevent the cable from blocking communication
between the infrared remote receiver and remote control
(see the illustration).
Infrared Remote Receiver
Remote Control Operating Range
Interactive Camera
Cable Holder (supplied)
USB Cable (supplied)