SMC Networks SMC2555W-AG - Manual (Page 131)

Entering Commands
6-7
Exec Commands
When you open a new console session on the access point, the
system enters Exec command mode. Only a limited number of
the commands are available in this mode. You can access all
other commands only from the configuration mode. To access
Exec mode, open a new console session with the user name
“admin.” The command prompt displays as “SMC Enterprise AP#”
for Exec mode.
Configuration Commands
Configuration commands are used to modify access point
settings. These commands modify the running configuration and
are saved in memory.
The configuration commands are organized into three different
modes:
• Global Configuration - These commands modify the system
level configuration, and include commands such as
username and password.
• Interface-Ethernet Configuration - These commands modify
the Ethernet port configuration, and include command such as
dns and ip.
• Interface-Wireless Configuration - These commands modify
the wireless port configuration, and include command such as
ssid and authentication.
Username: admin
Password: [system login password]
SMC-AP#