SMC Networks SMC2555W-AG - Manual (Page 168)

Command Line Interface
6-44
Command Mode
Exec
Caution: Beware of deleting application images from flash memory. At
least one application image is required in order to boot the
access point. If there are multiple image files in flash memory,
and the one used to boot the access point is deleted, be sure
you first use the bootfile command to update the application
image file booted at startup before you reboot the access
point.
Example
This example shows how to delete the test.cfg configuration file
from flash memory.
Related Commands
bootfile (page 6-41)
dir (page 6-44)
dir
This command displays a list of files in flash memory.
Command Mode
Exec
Command Usage
File information is shown below:
SMC-AP#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
SMC-AP#
Column Heading Description
File Name The name of the file.
Type (2) Operation Code and (5) Configuration file
File Size The length of the file in bytes.