SMC Networks SMC2555W-AG - Manual (Page 225)

VLAN Commands
6-101
native-vlanid
This command configures the native VLAN ID for the access
point.
Syntax
native-vlanid <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-64)
Default Setting
1
Command Mode
Global Configuration
Command Usage
When VLANs are enabled on the access point, a VLAN ID (a
number between 1 and 4095) can be assigned to each client
after successful authentication using IEEE 802.1x and a
central RADIUS server. If a wireless client does not have a
VLAN ID configured on the RADIUS server, the access point
assigns the user to its own configured native VLAN ID (a
number between 1 and 64).
Example
Related Commands
vlan (page 6-100)
SMC-AP(config)#native-vlanid 3
SMC-AP(config)#