SMC Networks SMC2555W-AG - Manual (Page 136)

Command Line Interface
6-12
end
This command returns to the previous configuration mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration
Example
This example shows how to return to the Configuration mode
from the Interface Configuration mode:
exit
This command returns to the Exec mode or exits the
configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Exec mode from the
Interface Configuration mode, and then quit the CLI session:
SMC-AP(if-ethernet)#end
SMC-AP(config)#
SMC-AP(if-ethernet)#exit
SMC-AP#exit
CLI session with the Access Point is now closed
Username: