SMC Networks SMC2555W-AG - Manual (Page 156)

Command Line Interface
6-32
sntp-server timezone
This command sets the time zone for the access point’s internal
clock.
Syntax
sntp-server timezone <hours>
hours - Number of hours before/after UTC.
(Range: -12 to +12 hours)
Default Setting
None
Command Mode
Global Configuration
Command Usage
This command sets the local time zone relative to the
Coordinated Universal Time (UTC, formerly Greenwich Mean
Time or GMT), based on the earth’s prime meridian, zero
degrees longitude. To display a time corresponding to your
local time, you must indicate the number of hours and minutes
your time zone is east (before) or west (after) of UTC.
Example
show sntp
This command displays the current time and configuration
settings for the SNTP client.
Command Mode
Exec
SMC-AP(config)#sntp-server timezone +8
SMC-AP(config)#