SMC Networks SMC2555W-AG - Manual (Page 165)

Flash/File Commands
6-41
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile <filename>
filename - Name of the image file.
Default Setting
None
Command Mode
Exec
Command Usage
• The file name should not contain slashes (\ or /), the leading
letter of the file name should not be a period (.), and the
maximum length for file names is 32 characters. (Valid
characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• If the file contains an error, it cannot be set as the default file.
Example
SMC-AP#bootfile smc-img.bin
SMC-AP#