Show snmp, Flash/file commands, Show snmp -40 – SMC Networks SMC2555W-AG User Manual
Page 164: Flash/file commands -40, Command line interface 6-40 show snmp
![background image](/manuals/152938/164/background.png)
Command Line Interface
6-40
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Example
Flash/File Commands
These commands are used to manage the system code or
configuration files.
SMC-AP#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
SMC-AP#
Command
Function
Mode Page
bootfile
Specifies the file or image used to
start up the system
GC
copy
Copies a code image or configuration
between flash memory and a FTP/
TFTP server
Exec
delete
Deletes a file or code image
Exec
dir
Displays a list of files in flash memory Exec