SMC Networks SMC2555W-AG - Manual (Page 184)

Command Line Interface
6-60
Filtering Commands
The commands described in this section are used to filter
communications between wireless clients, control access to the
management interface from wireless clients, and filter traffic using
specific Ethernet protocol types.
filter local-bridge
This command disables communication between wireless clients.
Use the no form to disable this filtering.
Syntax
filter local-bridge
no filter local-bridge
Default
Disabled
Command Mode
Global Configuration
Command Function Mode Page
filter local-bridge Disables communication between
wireless clients GC 6-60
filter ap-manage Prevents wireless clients from
accessing the management interface GC 6-61
filter
ethernet-type
enable Checks the Ethernet type for all
incoming and outgoing Ethernet
packets against the protocol filtering
table GC 6-62
filter
ethernet-type
protocol Sets a filter for a specific Ethernet
type GC 6-63
show filter Shows the filter configuration Exec 6-64