SMC Networks SMC2555W-AG - Manual (Page 212)

Command Line Interface
6-88
Command Usage
• The “min” keyword indicates minimum power.
• The longer the transmission distance, the higher the
transmission power required. But to support the maximum
number of users in an area, you must keep the power as low
as possible. Power selection is not just a trade off between
coverage area and maximum supported clients. You also
have to ensure that high strength signals do not interfere
with the operation of other radio devices in your area.
Example
max-association
This command configures the maximum number of clients that
can be associated with the access point at the same time.
Syntax
max-association <count>
count - Maximum number of associated stations.
(Range: 0-64)
Default Setting
64
Command Mode
Interface Configuration (Wireless)
Example
SMC-AP(if-wireless g)#transmit-power half
SMC-AP(if-wireless g)#
SMC-AP(if-wireless g)#max-association 32
SMC-AP(if-wireless g)#