SMC Networks SMC2555W-AG - Manual (Page 148)

Command Line Interface
6-24
logging on
This command controls logging of error messages; i.e., sending
debug or error messages to memory. The no form disables the
logging process.
Syntax
logging on
no logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to
memory. You can use the logging level command to control
the type of error messages that are stored in memory.
Example
logging host
This command specifies a syslog server host that will receive
logging messages. Use the no form to remove syslog server
host.
Syntax
logging host <host_name | host_ip_address>
no logging host
• host_name - The name of a syslog server.
(Range: 1-20 characters)
• host_ip_address - The IP address of a syslog server.
SMC-AP(config)#logging on
SMC-AP(config)#