SMC Networks SMC2555W-AG - Manual (Page 202)

Command Line Interface
6-78
• For most wireless adapters, the channel for wireless clients
is automatically set to the same as that used by the access
point to which it is linked.
Example
turbo
This command sets the access point to an enhanced mode (not
regulated in IEEE 802.11a) that provides a higher data rate of up
to 108 Mbps.
Default Setting
Disabled
Command Mode
Interface Configuration (Wireless - 802.11a)
Command Usage
• The normal 802.11a wireless operation mode provides
connections up to 54 Mbps. Turbo Mode is an enhanced
mode (not regulated in IEEE 802.11a) that provides a higher
data rate of up to 108 Mbps. Enabling Turbo Mode allows
the access point to provide connections up to 108 Mbps.
• In normal mode, the access point provides a channel
bandwidth of 20 MHz, and supports the maximum number
of channels permitted by local regulations (e.g., 11 channels
for the United States). In Turbo Mode, the channel
bandwidth is increased to 40 MHz to support the increased
data rate. However, this reduces the number of channels
supported (e.g., 5 channels for the United States).
Example
SMC-AP(if-wireless g)#channel 1
SMC-AP(if-wireless g)#
SMC-AP(if-wireless a)#turbo
SMC-AP(if-wireless a)#