Operating displays and connections, Front panel – Siemens SE505 User Manual
Page 11
10
First Steps
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003
Operating displays and connections
Front panel
LED displays
The front panel of the Gigaset SE505 dsl/cable contains LED displays that show the
operating state and simplify installation and fault finding in the network.
The LED's show the following:
LED
State
Status
Power
On
The Gigaset SE505 dsl/cable is on.
Off
The Gigaset SE505 dsl/cable is off.
WWW
On
There is an Internet connection.
Off
There is no Internet connection.
The WWW LED indicates the correct status when the
connection is opened or closed directly by the router. This
happens when the DSL connection is configured with the
PPPoE or PPTP protocol in the Gigaset SE505 dsl/cable.
WLAN
Flashing
The Gigaset SE505 dsl/cable is sending or receiving data on its
wireless interface.
Off
The wireless interface is not active.
!