Siemens SE505 - Manual (Page 62)

61
General configuration with Basic Setup
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
Testing the WAN connection and completing the configuration
In the next step you can test whether your Internet access is working correctly.
◆ To start the connection test, click on Start test.
This opens a window in which you will see the test steps and the test result.
If the test fails, check that
– all the necessary cables are connected
– the various devices are connected to the power supply
– the necessary LED's light up
If you cannot find any hardware problems, check your settings again. To do this click
BACK.