Installing the tcp/ip protocol – Siemens SE505 User Manual
Page 22
21
Configuring the local network
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_tcpip.fm / 16.07.2003
Installing the TCP/IP protocol.
The
protocol ensures that the PC's in the network can communicate with each
other. You must first install this
for the network adapter that establishes the
connection to the Gigaset SE505 dsl/cable.
◆
In the Network window move from the Identification tab to the Configuration tab.
◆
In the Network window, check that there is a TCP/IP -> entry for your network card
or network adapter in the list of components. If you are using a Gigaset PCI Card 54
as the wireless network adapter for example, then there must be an entry called
TCP/IP -> Siemens Gigaset PCI Card 54.
◆
If the entry does not exist, click on Add.
◆
Select Protocol as the network component type and click on Add.
◆
In Manufacturers select Microsoft and in Network Protocols select TCP/IP before
confirming with OK.