Activating – Siemens SE505 User Manual
Page 18
17
First Steps
Gigaset SE505 dsl/cable / de / A31008-E505-B100-1-19 / device.fm / 16.07.2003
Activating
Connect the mains adapter cable to the 12V 1A socket on the router. Plug the mains
adapter into a mains socket.
This activates the Gigaset SE505 dsl/cable. The power LED on the front lights up and the
WAN LED flashes, indicating that a modem is connected.
Flashing LAN LED's indicate when a device is connected to the corresponding LAN
connection.
The WLAN/ACT LED lights up, indicating that the wireless interface of the Gigaset SE505
dsl/cable has been activated.
The wireless link to the PC's connected via a wireless network adapter will be established
automatically if their network adapters have been configured with the same
as the
router (see page 15). It can take a few seconds for the wireless connection to be
established. The WLAN/LINK LED flashes to indicate when devices are connected with
the wireless interface.
If this is not the case, please turn to "Fault tracing" on page 105.