Wan configuration – Siemens SE505 User Manual
Page 78
77
Configuration with Advanced Setup
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
WAN Configuration
Once you have configured your router with the Basic Setup, you have already
configured the
connection (Internet access) of your router. Use the WAN
configuration option in Advanced Setup to check and change these settings.
You can also change the operating mode of the Gigaset SE505 dsl/cable. The Gigaset
SE505 dsl/cable is supplied as
but you can also use it as a
To edit the router's WAN settings:
◆
Select the WAN menu.
◆
Select the desired operating mode Router or Bridge.
Configuring as a Bridge
If you select Bridge for the router, it can be used as a link between its local network
) and other LAN segments.
◆
Click on APPLY to apply the setting.
i
In Bridge mode, the WAN connection is configured as a connection with
other LAN's and cannot be used for Internet access.
i
You must select Bridge mode if you wish to use the
function
with your Gigaset SE505 dsl/cable. In this case you should connect it up
to an
with the WAN connection.