Siemens SE505 - Manual (Page 59)

58
General configuration with Basic Setup
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
Configure connection with dynamic IP address
Complete this screen if your Internet Service provider has given you a
Dynamic IP
address for your Internet connection. In this case your router is a DHCP Client.
◆ If you have been given a host name by your Internet service provider, please enter it
in the Host name window.
◆ If your Internet Service Provider has given you a Domain name, enter in the Domain
name window.
◆ The MAC address is set by default to the hardware address of the router's WAN port.
Do not change this unless required to do so by your Internet Service Provider.
◆ When you have entered the data, click on NEXT.
i
In this connection type your router is assigned a Dynamic IP address by
the Internet Service Provider.
If you want to use a PC in your network as a server, you can use the
router's DynDNS service (see page 89).