Siemens SE505 User Manual

Page 71

Advertising
background image

70

Configuration with Advanced Setup

Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003

SSID
Before the wireless network components can communicate with each other, you

must use the same

SSID

(Service Set Identifier).

The Gigaset SE505 dsl/cable comes supplied with the SSID configured as

ConnectionPoint. You should change this SSID for security reasons.
Enter a character string of your choice. The SSID is case sensitive. It can be up to

32 alphanumerical characters long.

SSID visible
If this option is enabled, the Gigaset SE505 dsl/cable will send the SSID in all data

transmissions, and your router's SSID will be displayed on PC's that have a wireless

network adapter. In this case eavesdroppers could use the SSID to gain access to your

network.
Your router's SSID will not be displayed if you disable the SSID option. This will

increase protection against unauthorised access to your wireless network. Make a

note of the SSID however - you will need it to log your PC onto your router.

Wireless Channel
Channel used by the Gigaset SE505 dsl/cable to communicate with other wireless

network components. You must use a common channel so that the wireless network

components can communicate with one another.

Access point name
You can enter a name for your router here. This name will be used if you want to do

Roaming

with your router. If you do not need Roaming, you leave the default name

as it is.

BSSID
The router's

BSSID

is displayed here. This is for information only – it cannot be

changed.

i

Remember that the connection to the wireless network adapters

will be interrupted until you enter the new SSID on them as well.

You will find a detailed example of how to change the SSID in

"Practical Tips and Configuration Examples"on the CD supplied.

i

The available channel settings are governed by your country's

regulations. They define the number of available channels. The

default setting is determined by the country setting (see page 52).

You should not change this setting unless you have a good reason to

do so.

Advertising