Siemens SE505 - Manual (Page 77)

76
Configuration with Advanced Setup
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
◆ IP Pool Range
In
IP Pool Range enter the range of IP addresses which the router should use for
automatically assigning IP addresses to the PC's.
Enter the first and last addresses.
In the bottom half of the screen you can create a list of PC's to which the DHCP server
will always assign the same IP address. This function is useful when you wish to define
filter rules for certain PC's or forward ports to certain PC's (refer to "Filtering Internet
access" on page 84 or "Port Forwarding" on page 88). The relevant PC must always have
the same IP address.
You can create the list of PC's in two ways:
◆ From the list of logged-in PC's.
You should use this option when the appropriate PC's are logged on.
– To do this, select the List of logged on PC's option in the Define New Entry
window.
– From the list, select the PC's you wish to add to the list, then click on Add to list.
◆ By entering their MAC address
You should use this option when the PC's you wish to add to the list are not currently
logged onto the router.
Note: You can find out the MAC addresses of the wireless network adapters of the
PC's with the command ipconfig /all on the relevant PC's.
– In the Define New Entry window, select MAC Address.
– Now enter the MAC addresses of the PC's you wish to add to the list. To improve
clarity, type in a name for the PC, then click on Add to list.
◆ To remove an entry from the list, click on Delete in the right hand column of the list
entry.
◆ Click on APPLY to apply the settings.
i
The first three fields of the first and last IP address always have the
first three fields of the router's IP address as their default setting
because the subnet mask is always 255.255.255.x. This means that
the first three address segments for all network components must be
identical.