Selecting the language – Siemens SE505 User Manual
Page 47
46
The user interface
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
You will now see the start page.
Selecting the language
The first time you launch the user interface it will appear in English. If you do not want
to change the language, you can skip this section.
◆
If you wish to change the user interface language to German, French, Italian,
Spanish or Dutch, select the required language from the Select your language pick
list.
◆
If the language you require is pre-installed, the user interface will now be displayed
in this language.
◆
If the required language is not pre-installed, you must run a firmware upgrade. You
will see a prompt - click on OK to confirm. This opens the Firmware screen.
i
English and German are pre-installed at the factory.