Lan configuration, Defining the router's private ip address, Configuration – Siemens SE505 User Manual
Page 74
73
Configuration with Advanced Setup
Gigaset SE505 dsl/cable / English / A31008-E505-B100-1-7619 / configure_router.fm / 16.07.2003
LAN Configuration
You can use LAN configuration to
◆
define an IP address for the router (see below),
◆
enable or disable the router's UPnP functionality (see page 77) and
◆
configure the router's DHCP server (see page 78).
Defining the router's private IP address
in this screen. The default IP address for the
router is 192.186.1.1. This is the router's
. This is the address under
which the router can be reached on the local network. It can be freely assigned from the
block of available addresses. The IP address under which the router can be reached from
outside is assigned by the Internet Service Provider.
◆
In the LAN menu, select Private IP address.
◆
If you want to assign the router a different IP address, enter it in IP Address.
◆
The
is 255.255.255.0 by default. We advise that you do not change
this setting.
◆
Click on APPLY to apply the settings.
i
We recommend using an address from a block that is reserved for
private use. This address block is 192.168.2.1 - 192.168.255.254.