Sony D-VM1 - Manual (Page 43)

43
Sound Adjus
tme
nts
The display examples are as follows:
• PCM (stereo)
• Dolby Surround
• Dolby Digital 5.1ch
“LFE” is enclosed in a solid line regardless
of output of LFE signal component.
• MPEG audio
• DTS
“LFE” is enclosed in a solid line regardless
of output of LFE signal component.
Note
If “DTS” is set to “OFF” in “CUSTOM SETUP,” and
an optical digital cord is not connected, the DTS track
selection option will not appear on the screen even if
the disc contains DTS tracks (page 67).
Sound Mode Settings
Virtual Surround lets you enjoy surround
sound effects by using sound imaging to
create virtual speakers from the sound of the
headphones or front speakers (L: left, R:
right) without using actual speakers.
You can also enjoy more powerful bass
sound by emphasizing the bass-boosted
sound.
Selecting the sound mode directly
While pressing SHIFT, press NX
repeatedly during playback.
Each time you press the button, the sound
mode changes as follows:
PROGRAM FORMAT
PCM 96kHz 24bit
L C R
S
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L C R
LS RS
LFE
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L R
LS RS
PROGRAM FORMAT
MPEG 2/2
L C R
LS RS
LFE
PROGRAM FORMAT
DTS 3/2.1
v / V /ENTER
SHIFT
NX
(SOUND
MODE)
NORMAL
m
V-SUR i1
m
V-SUR i2
m
V-SUR 5
m
MEGABASS1*
m
MEGABASS2*
* These options do not appear when an audio cord
is connected using the AV output adaptor.
,
continued ,