Sony D-VM1 User Manual
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an
MD deck or DAT deck
This connection will use your 2 front speakers connected to your stereo amplifier (receiver) for
sound. If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the
amplifier (receiver) has a digital input jack, you may use
. When connecting to an MD deck
or a DAT deck, use
. In this case, you can also connect the player directly to the MD deck
or DAT deck without using your stereo amplifier (receiver).
Recommended surround sound effects for the
• V-SUR 5 (page 43)
To realize better surround sound effects, make sure that your listening position is in between your speakers.
In case of the
connection, you need to set the digital output signal (page 61).