Sony D-VM1 - Manual (Page 61)

61
Us
ing w
it
h
Othe
r Compon
e
n
ts
6
Press X/x to select “QUICK,” then
press ENTER.
The Setup Display used for selecting the
aspect ratio of the TV appears.
7
Press X/x to select the item.
8
Press ENTER.
Quick Setup is finished.
Step 6: Settings for the
Digital Output Signal
To enjoy surround sound effects, the
following items must be set as described
below for the audio connection you selected
in pages 54 to 58 (
through ).
Refer to page 63 for details on using the
Setup Display.
Audio Connection (pages 53 to 58)
No settings are needed because no optical
digital cord is used.
If the AV amplifier (receiver) has a
Dolby Digital decoder
Set “SOUND MODE” to “NORMAL” (page 43).
If the AV amplifier (receiver) has a
DTS decoder
Set “SOUND MODE” to “NORMAL” (page 43).
TV Type Select Page
A wide-screen TV
or 4:3 standard TV
with the wide-
screen mode 16:9 65
4:3 standard TV 4:3 LETTER
BOX or 4:3 PAN
SCAN 65
1 2 ( 2 7 )
QUICK
CUSTOM
QUICK
1 8 ( 3 4 )
C 0 0 : 0 9 : 5 7
STOP
DVD
CUSTOM SETUP
TV TYPE: 16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
PARENTAL CONTROL
ANGLE MARK:
AUDIO DRC:
DIGITAL OUT
DOLBY DIGITAL:
D–PCM
MPEG: PCM
OFF DTS:
Item Select Page
DOLBY
DIGITAL D-PCM 66
MPEG PCM 66
DTS OFF 66
Item Select Page
DOLBY DIGITAL DOLBY DIGITAL 66
DTS OFF 66
Item Select Page
DTS ON 66
B D
A B-1 C-1
B-2 C-2
D
D
continued ,