Receipt of system components, Technical assistance – Sierra INNOVA-MASS 241-VTP User Manual

Page 8

Advertising
background image

Chapter 1 Introduction

Series 24-HP Instruction Manual

1-2

IM-24-HP

Note and Safety Information

We use note, caution and warning statements throughout this book to
draw your attention to important information.

Warning!

Caution!

Note

This statement appears with
information that is important to
protect people and equipment
from damage. Pay very close
attention to all warnings that
apply to your application.

This statement appears with
information that is important
for protecting your equipment
and performance. Read and
follow all cautions that apply
to your application.

This statement appears with a
short message to alert you to
an important detail.

Receipt of System Components

When receiving a Sierra mass flow meter, carefully check the outside
packing carton for damage incurred in shipment. If the carton is dam-
aged, notify the local carrier and submit a report to the factory or distrib-
utor. Remove the packing slip and check that all ordered components are
present. Make sure any spare parts or accessories are not discarded with
the packing material. Do not return any equipment to the factory without
first contacting Sierra Customer Service.

Technical Assistance

If you encounter a problem with your flow meter, review the configura-
tion information for each step of the installation, operation and set up pro-
cedures. Verify that your settings and adjustments are consistent with fac-
tory recommendations. Refer to Chapter 4, Troubleshooting, for specific
information and recommendations.

If the problem persists after following the troubleshooting procedures
outlined in Chapter 4, contact Sierra Instruments, Technical Support at
(888) 386-7835 or (303) 682-9999 between 8:00 a.m. and 5:00 p.m.
MST. When calling Technical Support, have the following information
on hand:

• the flow range, serial number and Sierra order number (all

marked on the meter nameplate)

• the problem you are encountering and any corrective action

taken

• application information (gas, pressure, temperature and pip-

ing configuration)

Advertising
This manual is related to the following products: