Playing back the track(s) you recorded, 1 press the [reset] key to return to the beginning, 2 press the [start/stop] key – KORG TRINITY HDR-TRI User Manual
Page 15: Adjusting the pan or volume balance of the tracks, 2 set the mix audio track mode to manual for the a, 3 press the [reset] key to return to the beginning, 4 use the pan/volume settings to adjust the pan an, 5 when you are finished, press the [start/stop] ke, Playback
Playback
12
Playback
Playing back the track(s) you recorded
1
Press the [RESET] key to return to the beginning of the song.
2
Press the [START/STOP] key.
The audio that was recorded will be played back.
Adjusting the pan or volume balance of the tracks
You can adjust the pan and volume of each track so that the recorded tracks are
played back in an appropriate balance. You can also use the equalizer to adjust
the tone of each track.
1
Access the Sequencer mode P1 tab 6 page (MixA1–4).
2
Set the Mix Audio Track Mode to MANUAL for the audio tracks that have already
been recorded.
3
Press the [RESET] key to return to the beginning of the song, and press the [START/
STOP] key.
Playback will begin.
4
Use the Pan/Volume settings to adjust the pan and volume of each track, and use
EQ to adjust the tone.
5
When you are finished, press the [START/STOP] key.
1
4
2