4 for the length field, specify the number of meas, 5 for the meter* field, specify the time signature, 6 to execute the insert measure command, press the – KORG TRINITY HDR-TRI User Manual
Page 40: 2 when you choose copy measure, the dia2 log box a, 3 specify the copy source song, 4 specify the copy source audio track. if you 4 wi, 5 specify the copy source start measure and end me, 6 to execute the copy measure command, press the o, Introduction operation parameters appendix, 5–3h: copy measure
Sequencer P5
37
Introduction
Operation
Parameters
Appendix
* If you want the time signature of the inserted measures to match the exist-
ing time signature, set this to **/**.
With a setting other than **/**, the time signature of the inserted measures
will change, and all tracks will be played with the specified time signature
for those measures.
If measures are inserted between measures spanned by a note in a MIDI
track, that note will be turned off immediately before the inserted measure;
i.e., it will be shortened from its original duration.
5–3H: Copy Measure
This command copies playback data from the audio track specified in the dialog
box to the Start Measure of the audio track specified in the tab 3 page.
Be aware that executing the Copy Measure command will change the playback
data as follows.
• If you copy measures which contain no playback data, the copy destination
measures will be blank.
• The playback data previously located at the copy destination will be erased,
and replaced by the copied playback data.
• The playback data of the copied measures will be played back in accordance
with the time signature of the copy destination.
4
For the Length field, specify the number of measures that will be inserted.
5
For the Meter* field, specify the time signature of the measures that will be
inserted.
6
To execute the Insert Measure command, press the OK button. To cancel
without executing, press the Cancel button.
1
In the tab 3 page, specify the copy destination track and the Start Measure.
2
When you choose Copy Measure, the dia-
log box at right will appear.
3
Specify the copy source song.
4
Specify the copy source audio track. If you
wish to copy the playback data of all tracks
of the specified song including the MIDI
tracks, check the All Tracks box.
This is an easy way to create repeated sec-
tions such as refrains within a song.
5
Specify the copy source Start Measure and End Measure.
6
To execute the Copy Measure command, press the OK button. To cancel
without executing, press the Cancel button.
Time signature = **/**
Track 2
5 (2/4)
4 (5/4)
1 (4/4)
2 (7/8)
3 (7/8)
1 (4/4)
2 (4/4)
4 (5/4)
5 (2/4)
3 (3/4)
1 (4/4)
2 (4/4)
4 (5/4)
5 (2/4)
3 (3/4)
1 (4/4)
2 (7/8)
4 (5/4)
5 (2/4)
3 (7/8)
Track 2
5 (2/4)
4 (5/4)
Track 2
1 (4/4)
2 (4/4)
1 (4/4)
2 (4/4)
4 (5/4)
5 (2/4)
3 (3/4)
3 (3/4)
1 (4/4)
2 (4/4)
4 (5/4)
5 (2/4)
3 (3/4)
1 (4/4)
2 (4/4)
4 (5/4)
5 (2/4)
3 (3/4)
Track 1
Track 1
Track 1
Track 2
Track 1
Time signature = 7/8
Before Insert
After Insert
Two measures inserted
Two measures inserted
Measures 4 and 5 will be the existing time
signature.
Measures 2 and 3 will be 7/8, measures 4
and 5 will be the existing time signature.