5 press the ok button. the dialog box 5 at right w, 6 the dialog box of step 2 will reap6 pear. start, 7 when the restoration operation is 7 completed, t – KORG TRINITY HDR-TRI User Manual
Page 55: 2 when you choose copy with 2 sound, the dialog bo, 3 select the hard disk and directory of 3 the copy, 1 select a .sng file, 2 when you choose disp used sound 2 list, the dial, 3 press the ok button
Disk P1
52
1–4D: Copy with Sound
1–4E: Disp Used Sound List
5
Press the OK button. The dialog box
at right will appear.
Specify the directory into which the
file will be restored.
6
The dialog box of step
2
will reap-
pear. Start the DAT recorder, and
restoring will begin.
7
When the restoration operation is
completed, the display will indicate
Completed. When this display
appears, stop your DAT recorder.
This command copies the selected .SNG file with the sounds it uses to another
hard disk. If at this time a .PCG file with the same name exists in the current
directory, it will also be copied.
However if a hard disk and removable media (fixed at ID6) are both connected,
and you select a hard disk of ID0–5 as the copy source, the copy destination will
be the removable media of ID6. If you select the removable media of ID6 as the
copy source, you will able to select a hard disk of ID0–5 as the copy destination.
1
In the tab 4 page, select the copy
source /SNG file.
2
When you choose Copy with
Sound
, the dialog box at right will
appear.
3
Select the hard disk and directory of
the copy destination, and press the
Copy button
.
This command displays the sounds
used by the selected .SNG file.
1
Select a .SNG file.
2
When you choose Disp Used Sound
List
, the dialog box at right will
appear.
3
Press the OK button.