KORG TRINITY HDR-TRI - Manual (Page 21)

Creating a song in conjunction with the MIDI sequencer
18
set Input Level to the next higher setting.
Recording
0 Press the [RESET] key to return to the beginning of the song, press the [REC/WRITE]
key and then (after making sure that the [START/STOP] key LED is blinking) press
the [START/STOP] key.
Recording will start. Sing into the mic while listening to the accompaniment of
the MIDI sequencer.
A When you finish recording, press the [START/STOP] key.
Adjusting the balance and equalizer for the monitor output
Here’s how to adjust the pan, volume and EQ of the vocal that was recorded on
the audio track. To make adjustments for the MIDI sequencer, use the tab 3 or 4
page (Mix 1–8 or Mix 9–16).
B Access the tab 6 page (MixA1–4).
C Set the Mix Audio Track Mode to MANUAL for the channel that you wish to adjust
(channel 1 in this example).
D Press the [RESET] key to return to the beginning of the song, and then press the
[START/STOP] key.
The song with vocals will begin playing back.
E Use Pan/Volume to adjust the pan and volume of channel 1 to create an appropri-
ate balance of sound in the monitor output. Use EQ to adjust the tone.
A Pan setting of C064 will produce the impression of singing from center stage.
Using effect processing
If you wish to apply effects to give spaciousness to the vocal, use the Send
parameters and the “Master Effects” of P8 to make settings for the effect types
and the amount of the effects.
F With the recorded song playing back, set Send to about 64.
G Access the P8 page.
Select the effects in the tab 1 (Master FX) page (make detailed effect settings in
the tab 2 and tab 3 pages as necessary), and raise the Return parameters to
adjust the mix with the original sound.
To adjust the depth of the effects, use the master effect parameters to make set-
tings for each effect, and use the P1 Send and P8 Return parameters to adjust the
sends and returns.
Recording mixer events
Here’s how to record pan, volume, send, and equalizer mixer events.
H Access the Sequencer mode P1 tab 5 page (MixA1–4).
For the Track item, select MIXER REC.
I Set the Mix Audio Track Mode to WRITE for the channel that you wish to record
(channel 1 for this example).
J Press the [RESET] key to return to the beginning of the song, press the [REC/WRITE]
key and then (after making sure that the [START/STOP] key LED is blinking) press
the [START/STOP] key.
The song will playback.
K Adjust the Pan/Volume, Send, and EQ of the channel whose Mix Audio Track
Mode was set to WRITE (channel 1 for this example).
Your adjustments will be recorded as mixer events.