KORG TRINITY HDR-TRI - Manual (Page 28)

Sequencer P1
25
Introduction
Operation
Parameters
Appendix
1–5m: Monitor Mode Select
This selects Auto Input ON/OFF.
Audio tracks that are selected in “1-5d: Track” will be monitored differently
than audio tracks that are not selected. (Refer to the table below.)
If this is
checked , Auto Input will be ON . During auto/manual punch in record-
ing, monitoring will be switched automatically for the audio tracks selected in
the Track page: the external input will be monitored during the measures being
recorded, and the track playback will be monitored before and after these mea-
sures.
For audio tracks which are not selected in the Track page, the track playback
will always be monitored.
If this is
not checked , Auto Input will be OFF . Audio tracks selected in the Track
page will always monitor the external input.
For audio tracks which are not selected in the Track page, the track playback
will always be monitored.
Audio track monitoring (Line: external input, Track: track playback)
* When auto punch in recording is performed with Auto Input ON, approxi-
mately 0.5 seconds will be required from when the Punch Out point is
reached until the track playback sound can once again be monitored. (It is not
the case that the track audio in this portion has been lost.)
Page Menu Command
1–5D: Rec HD Select
Select the hard disk on which recording will take place.
The amount of time available for recording (Free Time) will also be displayed
here. Since the amount of recorded sound will gradually increase, we recom-
mend that you periodically use the Disk mode command “1–4F: Delete Unused
Sound” to organize the sound and maintain the Free Time space.
Auto Input Stopped Playing
During
Overwrite
Rec
During Punch Rec
...In In...Out Out...
Audio
track(s)
selected
by Track ON Line Track Line Track Line Track*
OFF Line Line Line Line Line Line
Audio
tracks not
selected
by Track
ON Track Track Track Track Track Track
OFF Track Track Track Track Track Track
1 When you select Rec HD Select , the dialog
box at right will appear.
2 Select the hard disk for recording: ID0–ID6.
Keep in mind the amount of Free Time as
you select a hard disk.
3 To execute Rec HD Select, press the OK but-
ton. To cancel without executing, press the
Cancel button.