KORG TRINITY HDR-TRI - Manual (Page 31)

Sequencer P1
28
ing recording, you can adjust EQ, Send, Pan, and Volume and the changes you
make will be recorded. By changing this setting to READ and then playing back
the song, EQ, Send, Pan, and Volume settings will change according to the mixer
events that were recorded.
Mixer events can also be edited individually in “5–3B: Automation Edit.”
WRITE can be selected only if MIXER REC has been selected in “1–5d:
Track.”
If after using WRITE you change from MIXER REC to another track, the Mix
Audio Track Mode of the audio track that was written will automatically
change to READ.
Page Menu Command
1–6D: Rec HD Select
This selects the hard disk on which recording will take place.
The Free Time (recordable time) will also be displayed.
For the procedure, refer to “1–5D: Rec HD Select.”
1–6E: Volume Pairing
This links the volume of a pair of channels. (When you adjust the volume of one
channel, the volume of the other channel will change automatically.)
1 When you choose Volume Pairing , the dia-
log box at right will appear.
Check the check box for the pair(s) of chan-
nels that you wish to link.
2 To execute Volume Pairing, press the OK
button. To cancel without executing, press
the Cancel button.