Kerio Tech Firewall6 - Manual (Page 16)

Chapter 2 Introduction
16
Figure 2.1 Installation — customization by selecting optional components
use). This will install the WinRoute low-level driver into the system kernel. WinRoute Engine
will be automatically launched when the installation is complete. The engine runs as a service.
Note:
1. If you selected the Custom installation mode, the behavior of the installation program will
be as follows:
• all checked components will be installed or updated,
• all checked components will not be installed or will be removed
During an update, all components that are intended to remain must be ticked.
2. The installation program does not allow to install the Administration Console separately.
Installation of the Administration Console for the remote administration requires a sepa-
rate installation package (file kerio-kwf-admin*.exe).
Protection of the installed product
To provide the firewall with the highest security possible, it is necessary to ensure that unde-
sirable (unauthorized) persons has no access to the critical files of the application, especially
to configuration files. If the NTFS system is used, WinRoute refreshes settings related to access
rights to the directory (including all subdirectories) where the firewall is installed upon each
startup. Only members of the Administrators group and local system account (SYSTEM) are
assigned the full access (read/write rights), other users are not allowed access the directory.