Kerio Tech Firewall6 User Manual
Page 315
23.1 VPN Server Configuration
315
Figure 23.5
VPN server settings — server port and routes for VPN clients
upon clicking on the Apply button:
(4103:10048) Socket error:
Unable to bind socket
for service to port 4090.
(5002) Failed to start service "VPN"
bound to address 192.168.1.1.
To make sure that the specified port is really free, view the Error log to see whether
an error of this type has not been reported.
Custom Routes
Other networks to which a VPN route will be set for the client can be specified in this
section. By default, routes to all local subnets at the VPN server’s side are defined — see
chapter
).
Hint
Use the 255.255.255.255 network mask to define a route to a certain host. This can be
helpful for example when a route to a host in the demilitarized zone at the VPN server’s
side is being added.