Kerio Tech Firewall6 User Manual
Page 86
Chapter 7
Traffic Policy
86
•
Log matching packets — all packets matching with rule (permitted, denied or dropped,
according to the rule definition) will be logged in the Filter log.
•
Log matching connections — all connections matching this rule will be logged in the
Connection log (only for permit rules). Individual packets included in these connec-
tions will not be logged.
Note: Connection cannot be logged for blocking and dropping rules (connection is not
even established).
The following columns are hidden in the default settings of the Traffic Policy window (for
details on showing and hiding columns, see chapter
Valid on
Time interval within which the rule will be valid. Apart from this interval WinRoute ignores
the rule.
The special always option can be used to disable the time limitation (it is not displayed in the
Traffic Policy dialog).
When a denying rule is applied and/or when an allowing rule’s appliance terminates, all active
network connections matching the particular rule are closed immediately.
Protocol inspector
Selection of a protocol inspector that will be applied on all traffic meeting the rule. The menu
provides the following options to select from:
Figure 7.20
Traffic rule — protocol inspector selection