Interface statistics, 2 interface statistics – Kerio Tech Firewall6 User Manual
Page 258
Chapter 20
Basic statistics
258
Warning
Be aware that using this option for the all users item resets counters of all users, including
unrecognized ones!
Note: Values of volumes of transferred data are also used to check user traffic quota (see
chapter
). Reset of user statistics also unblocks traffic of the particular user in case
that the traffic has been blocked for quota reasons.
View host...
This option is not available unless the selected user is connected to the firewall. The View
host option switches to the Status → Active Hosts section of the host the particular user
is connected from.
If the user is connected from multiple hosts, the View host option opens a submenu with
a list of all hosts which the particular user is connected from.
Refresh
This option will refresh the information on the User Statistics tab immediately. This
function is equal to the function of the Refresh button at the bottom of the window.
Auto refresh
Settings for automatic refreshing of the information on the User Statistics tab. Informa-
tion can be refreshed in the interval from 5 seconds up to 1 minute or the auto refresh
function can be switched off (No refresh).
Manage Columns
Use this option to select and unselect items (columns) which will (not) be displayed in the
table (see chapter
).
20.2 Interface statistics
The Interface statistics tab in Status → Statistics provides detailed information on volume of
data transmitted in both directions through individual interfaces of the WinRoute host in se-
lected time intervals (today, this week, this month, total).
Interfaces can be represented by network adapters, dial-ups or VPN tunnels. VPN server is
a special interface — communication of all VPN clients is represented by this item in Interface
statistics.
Optionally, other columns providing information on volume of data transmitted in individual
time periods in both directions can be displayed. Direction of data transmission is related to
the interface (the IN direction stands for data received by the interface, while OUT represents
data sent from the interface). Hiding/showing of columns is addressed in chapter
.