Kerio Tech Firewall6 User Manual
Page 47
47
Figure 5.2
Editing interfaces
Remove
Removes the selected interface from WinRoute. This can be done under the following
conditions:
•
the interface is an inactive (disabled) VPN tunnel,
•
the network adapter is not active or it is not physically present,
•
the interface is a dial-up which no longer exists in the system.
Network cards and dial-ups defined in the operating system as well as established VPN
tunnels cannot be removed in WinRoute.
Note:
1.
Records related to network cards or dial-ups that do not exist any longer (those that
have been removed) do not affect WinRoute’s functionality — such interfaces are con-
sidered as inactive (as in case of a hung-up dial-up).
2.
When an adapter is removed, the Nothing value is automatically used for correspond-
ing items of all traffic rules where the interface was used. These rules will be disabled.
This ensures that the traffic policy is not endangered (for details, refer to chapter
Dial or Hang Up /Enebale, Disable
Function of these buttons depend on the interface selected:
•
For dial-ups, the Dial and Hang-up buttons are available and they are used to