Kerio Tech Firewall6 - Manual (Page 241)

19.1 Active hosts and connected users
241
Figure 19.1 List of active hosts and users connected to the firewall
User
Name of the user which is connected from a particular host. If no user is connected, the
item is empty.
Currently Rx, Currently Tx
Monitors current traffic speed (kilobytes per second) in both directions (from and to the
host — Rx values represent incoming data, Tx values represent outgoing data)
The following columns are hidden by default. To view these columns select the Modify columns
option in the context menu (see below).
IP address
IP address of the host from which the user is connecting from
Login time
Date and time of the recent user login to the firewall
Login duration
Monitors length of the connection. This information is derived from the current time
status and the time when the user logged on
Inactivity time
Duration of the time with zero data traffic. You can set the firewall to logout users
automatically after the inactivity exceeds allowed inactivity time (for more details see
chapter 11.1 )
Start time
Date and time when the host was first acknowledged by WinRoute. This information is
kept in the operating system until the WinRoute Firewall Engine disconnected.
Total received, Total transmitted
Total size of the data (in kilobytes) received and transmitted since the Start time