Kerio Tech Firewall6 - Manual (Page 23)

2.7 Configuration Wizard
23
and administration. Thus WinRoute will enable all traffic between the firewall and the remote
host.
Note: Skip this step if you install WinRoute locally. Allowing full access from a point might
endanger security.
Figure 2.7 Initial configuration — Allowing remote administration
Enable remote access
This option enables full access to the WinRoute computer from a selected IP address
Remote IP address
IP address of the computer from where you will be connecting (e.g. terminal services
client). This field must contain an IP address. A domain name is not allowed.
Warning
The remote access rule is disabled automatically when WinRoute is configured using the net-
work policy wizard (see chapter 7.1 ).